Rollerball Pen Instructions and Manual

    Rollerball Pen Guide

    Removing / posting the cap

    Xezo pens come in two cap styles: screw-on/screw-off, and push-on/pull-off.

    If your pen has threads near the grip, it has a “screw-on” cap. If your pen does not have threads, it is a “snap-on” cap. The cap style is also included in the pen's description.

    • If your pen has a screw-on/screw-off cap 
      • To remove the cap: Hold the pen barrel firmly and gently unscrew the cap counterclockwise. To replace the cap, gently screw it back on. Never force a screw-on/screw-off cap, or you will destroy the internal threading!
      • Posting the cap: If your pen has threads on the end of the barrel, gently thread the cap onto the end to post it and unscrew it to un-post it.
    • If your pen has a push-on/pull-off cap 
      • To remove the cap: Hold the pen barrel firmly and pull the cap off. To replace the cap, gently push it back onto the barrel and snap it into place.
      • Posting the cap: Gently push the cap onto the end of the barrel to post it and pull it off to un-post it.  

    Ink flow note

    The ink in a rollerball pen will continue to flow if the writing point is left in direct contact with paper, fabric, or other porous materials when not in use. To prevent this, replace the cap on the barrel when you are finished writing.

     

    Changing the rollerball ink refill

    Note: You can purchase Xezo brand rollerball refills here. Xezo rollerball pens are also compatible with most standard G2-size rollerball, also known as "Euro style", cartridge refills.

    1. Remove the cap from the barrel and set it aside.
    2. Unscrew the grip section from the barrel.
    3. Pull the old ink refill out of the barrel. If the spring comes out of the barrel, insert it back into the end of the barrel.
    4. Firmly push the new rollerball refill into the grip section, writing point first.
    5. Screw the grip section and the barrel back together, then start writing!